如何選擇光纖熔接機?這就需要從光纖熔接機的參數入手：
1.適用光纖芯數：市面大多光纖熔接機都是單芯熔接機;如果想同時熔接多條光纖，就選擇帶狀光纖熔接機，可同時熔接12芯www.xbaixing.com。
2.熔接時間：一般來說熔接時間越短越好。
3.加熱時間：目前熔接機的加熱時間約為20秒左右小_百_姓_网。天氣冷時，加熱時間會變長，熔接機熔接芯數會變少。
4.熔接損耗：目前市面上熔接機的熔接損耗在0.02db左右小+百+姓+网。
5.電池供電：電池容量越大，使用時間越長。
6.操作環境：光纖熔接機需要放點，因此需考慮其支持範圍，範圍越大，機器越好小.百.姓.网。
7.機器壽命：國產熔接機能用3年，進口能用五年，平時需注意半年做一次保養。
8.光纖放大倍數：放大倍數越大，光纖熔接機有可能對得更准，損耗更低小~百~姓~网。
* * * * * *
創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。
想了解更多關於「如何選擇光纖熔接機」的內容，請瀏覽創世官網：http://livservices.com.hk
地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室
電話：852-31063235
——————
How to choose a fiber fusion splicer?
This requires starting with the parameters of the fiber fusion splicer:
1. Applicable fiber core number: Most fiber fusion splicers in the market are single-core fusion splicers; if you want to weld multiple fibers at the same time, you can choose a ribbon fiber fusion splicer, which can weld 12 cores at the same time.
2. Welding time: Generally speaking, the shorter the welding time, the better.
3. Heating time: At present, the heating time of the fusion splicer is about 20 seconds. When the weather is cold, the heating time will become longer and the number of fusion splicing cores will be less.
4. Welding loss: At present, the welding loss of the welding machine on the market is about 0.02db.
5. Battery power supply: The larger the battery capacity, the longer the battery life.
6. Operating environment: The fiber fusion splicer needs to be placed, so the support range should be considered. The larger the range, the better the machine.
7. Machine life: The domestic welding machine can be used for 3 years, the import can be used for 5 years, and it is necessary to pay attention to the maintenance for half a year.
8. Fiber magnification: The larger the magnification, the more likely the fiber fusion splicer is to be more accurate and the loss is lower.
* * * * * *
LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.
For more information about 'How to choose a fiber fusion splicer'，please visit : http://livservices.com.hk
Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong
Tel: +852 3106 3235
